Free Microsoft Excel 2013
Quick Reference
Free Microsoft 2013 Quick Reference Guide

Free Microsoft Excel 2013 Quick Reference

VBA code to count non blank cells in a range

I am trying to create VBA code to count the number of cells within a range that have either text or numbers entered in them. This needs to work on a row by row basis, i.e. the same code applied to row 6, 7, 8 onwards.

I have 12 cells in a row range that are being written into the spreadsheet using another code.

The activecell is set as a cell in column B

The 12 cells (labelled 'Deployments') are found in columns AL:AW and are being written using the codes

to

How do I create a countif code that is able to reference these values?

Can post a sample worksheet if it helps. Alternatively, the worksheet can be found under a previous thread

http://www.excelforum.com/excel-prog...d-working.html

Thanks


Post your answer or comment

comments powered by Disqus
Hi Guys,

Could you please be so kind as to provide me with some code that can count the number of non-blank cells in a selected column.

Thanks for your help.

Michael.

I have a file........see enclosed.

I want to count the number of non-blank cells in a range from A to Z along a given row.

Then once the loop is done i want it to tell me the row which had the most non-empty cells but its not working.

I am trying to count the Maximum Number of Blank Cells between Non Blank
Cells in a Range.
e.g.
Range A1:a13
a1 - 2
a3 - blank
a4 - blank
a5 - 24
a6 - blank
a7 - 7
a8 - 51
a9 - blank
a10 - blank
a11 blank
a12 - blank
a13 - 6
The answer is 4. Cells a9 to a12.
Any help appreciated.
Thanks,
Mal

Hi

In MS Excel 2007, I'm trying to use a function to search for (and display) a
specific text string that resides within a cell, providing that it is the
last non blank cell in a range of cells across a row.

e.g. If searching row 2:2 (or a section of this row) for the last non blank
cell, I want to then search within that last cell to locate the word "pass",
where the same cell may also contain any combination of text/number values.
If "pass" exists within the cell, I want to return a the same text value of
"pass". Note that “pass” may exist across various cells in the range.

-- I've managed to successfully return the entire contents that reside
within the last non-blank cell (with the following formula):

=IF(ISNA(LOOKUP(2,1/('QA Results'!$D2:$CY2""),'QA
Results'!$D2:$CY2)),"",LOOKUP(2,1/('QA Results'!$D2:$CY2""),'QA
Results'!$D2:$CY2))

-- I've also achieved similar results when searching the cell range for the
last known cell that successfully contains the text “pass” (this is not
necessarily the last non blank cell in the range). Again the entire cell
content is returned.

=IF(OR(ISNA('QA Results'!D2:CY2),ISERROR(LOOKUP(2,1/SEARCH("Pass",'QA
Results'!D2:CY2),'QA Results'!$D$2:$CY$2))),"",LOOKUP(2,1/SEARCH("Pass",'QA
Results'!D2:CY2),'QA Results'!$D$2:$CY$2))

Any assistance would be appreciated.

Forgive me for these trivial questions, but I cant find the answer using the documentation.

I want a formula to use the bottom non-blank cell in a range. How can this be achieved?

Please help: How can i programmatically lookup the cell adress for next
non-blank cell in a range?

Toreadore

--
toreadore
------------------------------------------------------------------------
toreadore's Profile: http://www.excelforum.com/member.php...o&userid=35850
View this thread: http://www.excelforum.com/showthread...hreadid=556407

Please help: How can i programmatically lookup the cell adress for next non-blank cell in a range?

Toreadore

I seem to be 'search challenged' today - I'm sure this is easy. How does one count the number of non-blank cells in a range using VBA?

Hey,

I am trying to write a function for a cell that counts non-contiguous cells in a column and then sums them together. The issue is this cell will be copied to multiple worksheets and will have to re-count all the cells when it is copied.

This is my first time writing a function.

Thanks in advance

First time here. I'm new to excel, so this will probably be very simple for most of you, but I have been trying to find an answer for hours. Any help would be much appreciated!

I need to know the value (which is a date) of the first non-blank cell in a range in a row. I have found some array formulas by searching forums/google etc., but they either return it for the whole row (which I don't want), or they return text (which I don't want), or they don't work at all.

The range is: B9:FL9. Some of the cells in this range are blank, some are "0", and some contain dates. I need to know the most recent (furthest left) cell that contains a date and what that date is. Thanks!

I'm working with 2 columns out of an Excel spreadsheet. First column "B" is
list of names (some cells may be blank) and the second column "F" contains
years (2001, 2002, etc.). I'd like to count non blank cells in "B" which
meet the criteria (2005) in the years "F" column.

Hello,

I am trying to produce a formula to count the number of non-blank cells to the right of the cell with the formula in it. I want the formula to return a '1' if there are 3 or more non-blank cells or a '0' if there are less than 3.

At the moment my formula is (example in this case for row 3):

=IF((COUNT(NOT(ISBLANK(B3:Z3))))>=3,1,0)

This is not working though and I don't know why. On rows where I have 3 or more non-blank cells it is still returning a '0' everytime.

Can anyone help??

Thanks,

Chris

I'm working with 2 columns out of an Excel spreadsheet. First column "B" is
list of names (some cells may be blank) and the second column "F" contains
years (2001, 2002, etc.). I'd like to count non blank cells in "B" which
meet the criteria (2005) in the years "F" column.

I am trying to post the results of one cell to the next blank cell in a different row. For example; I need the results in S3 to post to the next blank cell in row P. I tried the worksheet_change code below but that will only work if I make a manual entry in S3 and does not work if I use a formula in S3 to perform the calculation. My formula in S3 is =MAX(L5:L505). When I hit F9 to recalculate I need the results of S3 to post in row P each time. Perhaps there is a formula that I can use as opposed to VBA.


	VB:
	
 
Private Sub Worksheet_Change(ByVal Target As Range) 
    If Target.Address  "$S$3" Then Exit Sub 
     
    Application.EnableEvents = False 
    Range("P65536").End(xlUp).Offset(1, 0).Value = Target.Value 
    Application.EnableEvents = True 
End Sub 

If you like these VB formatting tags please consider sponsoring the author in support of injured Royal Marines


how can I COUNT only up to the first blank cell in a column?

In previous versions of Excel, when adding an Auto Filter to a column, a user
was able to select "non-blanks" from the pull down menu which would cause all
cells with no values or text within the same column to be hidden. In Excel
2007, the "non-blanks" option has been removed. How does one collapse all the
non-blank cells within a column using the filter in Excel 2007?

Hi,

Is the only way to select the first non blank cell in a range to use an
if statement.

e.g If D1 is the first cell in range A1 to F1 with info I want to
return 1 for A to for B and so on. So D1 would return 4

VBA Noob

--
VBA Noob
------------------------------------------------------------------------
VBA Noob's Profile: http://www.excelforum.com/member.php...o&userid=33833
View this thread: http://www.excelforum.com/showthread...hreadid=564240

I'm looking for a function or formula in Excel 2003 which will return the
last non-blank cell in a range. The values in the range are numeric;
however, they're not sorted in numeric order. I could probably figure out
how to write a macro, but I'd prefer a formula. Any suggestions?

Thanks.

I'm looking for a function or formula in Excel 2003 which will return the
last non-blank cell in a range. The values in the range are numeric;
however, they're not sorted in numeric order. I could probably figure out
how to write a macro, but I'd prefer a formula. Any suggestions?

Thanks.

Hey all,

Hope this is possible. I am trying to count non-blank cells in column D and number the rows with information concecutively.

1. Smith
2. Jones
3. Brown
4. Barnes
BLANK
BLANK
5. Kinley

I've tried everything I know, I've googles every combination of words that could help. I found one formula that 'kinda' worked, but it counted cells with the same data in them together, and to be honest, I can't remember what the formula was!

Hope yall can help!

Hi,

Is the only way to select the first non blank cell in a range to use an if statement.

e.g If D1 is the first cell in range A1 to F1 with info I want to return 1 for A to for B and so on. So D1 would return 4

VBA Noob

Hi All,

My first thread in here.

I have a situation where I have to count the number of Non Blank cells within a range which keeps on changing as situation changes.

To be more specific,

On Column D, from row 18 to row 29, I have values, then on row 30 I have a blank cell.
Again on Column D, from row 31 to row 40, I have values and then on row 41, I have a blank cell. I need a formula to count the number of Non blank cells until the first blank cell is reached or a formula when the first blank cell is hit.

The below formula searches through the range and gives me the number of the cell at which I have the blank cell. I have a blank cell at row 30 and hence i get the answer 13 using the below formula.

=MATCH(TRUE,INDEX(ISBLANK(D18:D32),0,0),0)

and

=COUNTA(D18:D29).

Another question is, in the above two formulas, how do I make the range into a dynamic range or a range which changes with change in another cell? I have cell K2 which has the value D5 and K3 as D19. How can I call the cell values into the above formula so that the range in the above formulae automatically changes to the values in the cells K2 and K3?

In simple terms, if K2 shows D256 and K3 shows D264, the formula should go and search the range between D256 to D264.

Please help. Been banging my head on this for the past two days. I am using Excel 2007.

Thanks..

I have selected a range of cells and want to change all values within that range to "0". Not all cells in that range have a value and I only want to change the cells that DO have a current value. Similar to
Edit>GOTO>Special>Blanks
But I want
Edit>GOTO>Special>Non-Blanks
that would select all cells with a value so I could then change them all to "0".

Thanks for your help!

Randy

Dear Forum

i have been searching for a solution to the above on internet and although there appears to be many examples. None of them in practice appear to work they all return either a #N/A or #Value

for example

i have data in cells a10:a20

i would like to return the value of the first non blank cell within this range

I have been using =INDEX(A10:A20,MATCH(TRUE,LEN(A10:A20)0,0),1)

Am i doing something fundementatly wrong

With Kind Regards

Paul


No luck finding an answer? You could always try Google.