I like to auto increment numbers in ascending order on the rows in Column A until it reaches the end of the data row in Column B, using VB codes and NOT by dragging the cells method. Column A has been created beforehand already.

Example:

Column A has been created beforehand already, and does not contain any numbers. Column B consists of existing data with unknown number of rows. By pressing a button, Column A is filled with auto generated row numbers, starting with 1 for the 1st row of data, and ends with the last number corresponding to the last data entry in Column B.

A (Auto Generation) B (Existing Data)

---------------------------------------

1 450

2 569

3 230

... ...

Last Number Last Data Entry

Example:

Column A has been created beforehand already, and does not contain any numbers. Column B consists of existing data with unknown number of rows. By pressing a button, Column A is filled with auto generated row numbers, starting with 1 for the 1st row of data, and ends with the last number corresponding to the last data entry in Column B.

A (Auto Generation) B (Existing Data)

---------------------------------------

1 450

2 569

3 230

... ...

Last Number Last Data Entry

- Auto increment Rows Number in a column using VB
- Prob matching numbers in a column using VB.
- Count the number of unique Numbers in a column
- Count the number of unique Numbers in a column
- Using the last number in a column
- How do I select the first occurance of a number in a column
- Identify Row Number based on Value in a cell and use that Row number in a Macro
- How to tell if the number in a column are the same
- How do I auto increment row number in pasting macro? (Code inside)
- Find last number in a column...
- Findingpossible combinations of numbers in a column that sum to a particular number
- Align numbers in a column to centre
- Row numbers in column
- Row number in a formula in Excel?
- Last Number in a column
- Average the numbers in a column but exclude some values based on other column data
- How to sum up only the positive numbers in a column
- Finding second highest number in a column
- Locate two numbers in a column
- How to show the largest number in a column ?
- How to populate each row value in a column based on the corresponding row value in another column?
- Reading last nonblank cell in a column using a macro
- Locating similar numbers in a column
- DECREASE ALL NUMBERS IN A COLUMN BY A PERCENTAGE

Example:

Column A has been created beforehand already, and does not contain any numbers. Column B consists of existing data with unknown number of rows (i.e. 450, 569,230,...). By pressing a button, Column A is filled with auto generated row numbers, starting with 1 for the 1st row of data, and ends with the last number corresponding to the last data entry in Column B.

A B

-- --

1 450

2 569

3 230

... ...

Last Number Last Data Entry

VB:The script is supposed to check column D (Lift truck # column) and find any values that match and then subtract the log times of the left adjacent C column cells next to the matching numbers in D column and print the diffennce in column G beside the right bottom most matching number in D.Range) Dim rng As Range Dim c As Range Set rng = Columns(4) If Intersect(Target, rng) Is Nothing Or Target.Count > 1 Then Exit Sub Target.Offset(0, -1) = Time Target.Offset(0, -2) = Date Set c = rng.Find(Target, After:=Target, lookat:=xlPart, searchorder:=xlByRows, searchdirection:=xlPrevious) If Not c Is Nothing And c.Address Target.Address Then Target.Offset(0, 3) = _ Target.Offset(0, -1) - c.Offset(0, -1) End SubIf you like these VB formatting tags please consider sponsoring the author in support of injured Royal Marines

As you can see the script is seeing "1450" as "50" and displaying the difference when the two numbers don't actually match. The script is seing the "50" that is in the "1450".

I am sure there is a quick and easy solution, but I an not experienced enough to know what it is..

Thanks for the help!

i'm currently trying to count the number of unique numbers in a Column

using this formula:

=SUMPRODUCT((A3:A3002"")/COUNTIF(A3:A4002;A3:A3002&""))

So far so good.....But I want to add some conditions like only count

the numbers that meet the condition say N1:N3000="SE*"

I tried a couple of things but nothing seem to work can you please help

out.....Don't laugh and I will paste my own failed solutions:

=SUMPRODUCT((A1:A3000"");(AND(OR(N1:N3000="SE*"; N1:N3000="INC*")/COUNTIF(A1:A3000;A1:A3000&""))))

On this one I get #VALUE! and i can't figure out why.

I have also tried to put the AND/OR condition before the actual

starting of the array of the SUMPRODUCT but nothing.

--

ajajmannen

------------------------------------------------------------------------

ajajmannen's Profile: http://www.excelforum.com/member.php...o&userid=34130

View this thread: http://www.excelforum.com/showthread...hreadid=538999

i'm currently trying to count the number of unique numbers in a Column using this formula: =SUMPRODUCT((A3:A3002<>"")/COUNTIF(A3:A4002;A3:A3002&""))

So far so good.....But I want to add some conditions like only count the numbers that meet the condition say N1:N3000="SE*"

I tried a couple of things but nothing seem to work can you please help out.....Don't laugh and I will paste my own failed solutions:

=SUMPRODUCT((A1:A3000<>"");(AND(OR(N1:N3000="SE*";N1:N3000="INC*")/COUNTIF(A1:A3000;A1:A3000&""))))

On this one I get #VALUE! and i can't figure out why.

I have also tried to put the AND/OR condition before the actual starting of the array of the SUMPRODUCT but nothing.

won't know what the exact cell is where that number will be located? The

last number will not be in a constant cell, this column is a running balance

column so additonal rows will be added daily.

Thanks for your help!

as in the "Lookup" function, return a same numbered cell (different column).

I have "0's" and "1's" in my column (intermixed) and I am looking for the

first occurance of a "1". I then want to look up another value in the same

row (different column). "Lookup" function doesn't work if you have multiple

values not sorted. I'm using Excel 2003.

Each employee has to login from a drop-down (sourced from Sheet.Employee Master), so their unique Employee Number is in "A13" of Sheet.LOGIN

Can I identify the ROW number and then use that ROW number in a macro to highlight and unlock specific Range of Cells in Sheet.PROPOSED SCHEDULE?

---where "Sheet.LOGIN("A13") = (the value in the cell Col A:"row" of Sheet.PROPOSED SCHEDULE)

I have attached a scaled down version of the Workbook.

Following code is scaled down-- this is for Employee 02 who appears on ROW 16 of the sheet. (macro is same for each employee, just uses a different row)

Sub ProposedEmployee02() ' ' Proposed02 Macro ' Macro recorded 1/27/2009 ' Highlights lit blue Range(COL B: COL F) and ' For Range(cells for each workday in each workweek): Highlight cells lt yellow and unlocks for employee input ' Sheets("PROPOSED SCHEDULE").Select Range("B16:F16").Select With Selection.Interior .ColorIndex = 35 .Pattern = xlSolid End With Range("G16:M16").Select With Selection.Interior .ColorIndex = 36 .Pattern = xlSolid End With Selection.Locked = False Selection.FormulaHidden = False Range("O16:U16").Select With Selection.Interior .ColorIndex = 36 .Pattern = xlSolid End With Selection.Locked = False Selection.FormulaHidden = False End Sub

The column that I need to look at has a five digit number in each cell and there are several hundred rows.

So I am trying to figure out if the five digit numbers in each cell within this particular column the same. Instead of using the scroll bar to move the page and look at each five digit number in each cell in that column.

Is there a formula that will tell if all of the five digit numbers in each cell within that particular column the same instead of visually trying to look at it??

Sincerely,

Lynn

I trying to create a macro where I have a specific amount of rows in a column copied and I want to paste it. But every time I paste it I want to increase the row number say A32 to the next one up. I have to go all the way to A2000 so it would be a lot of copying and pasting. Here's the macro I got going on now.

Sub Macro4() ' ' Macro4 Macro ' ' ActiveSheet.Paste Selection.Replace What:="$A848", Replacement:="$A32", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False End SubThe reason for the A848 is because that's just the generic column I already have copied. I want to add 1 to the A32 every time I paste it. Is this possible?

Thanks

I would like to be able to find all the possible combinations of numbers in a column that sum to a particular number.

for example I would like to know what combination of the numbers below add up to 606

253

263

851

90

521

85

in this case there are two possible answers 253 +263 +90, or 521+85

If anyone has any suggestions that would be great.

(also help with just finding the 1st possible answer would also be useful if finding both is too complicated, as there may only be one useful combination in my set of number anyway.

Cheers

42,978

7,458

23,266

43,730

2,506

but I want them like this:

6,947

9,323

8,113

7,974

how can do that. I'm using excel 2007, student edition.

thanks

For .e.g I want to have cell = 3/(current row number).

Also is it possible to make row numbers start from 0?

I have data rows 1-31 in 12 different columns. I want a to be able to pick

up a the last number entered in each of the columns. So for instance and

have data in rows 1-23 in column A, the data in rows 1-31 ni col B. Is

there a formula to put in row 45 that will pick up the last # entered in a

column.

Thanks for the help.

I think I'm having trouble because I'm seeing some formulas startout with =AVERAGEIF and others starting out with =AVERAGE(IF ...

[Well, to be honest, since I can't get either approach to work, maybe that isn't the problem.]

Anyway, here's the situation:

I want to average some of the numbers that appear in column AC (data in cells AC2:AC148) I want to exclude any numbers that correspond to rows that have an "y" in F2:F148.

Thanks in advance for your time.

A2 and A4 and A6.

I want to do something like this:

=SUMIF(A1,A4,A6 ">0")

Put I can`t figure uot how to just pick the cells with totals (A1, A4 and A6)

Hope you understand

I have attached a portion of my excel sheet wherein column A consist of dates and columns B to E comprise the sales figure. You will notice that datas in column B to E consist of blanks. What I would like to do is to locate automatically two adjacent numbers in a column that meets a criteria.

I have highlighted 2 numbers in each column which i want to locate. These 2 numbers in each column have a considerable decrease in amount. For example in column B: 70000/1825 = 38.36; column C: 1825/425 = 4.29 (Criteria: Number1/Number2 >=2).

I hope you understand what i mean..Thanks in advance.

How to find the largest number in a column and show it in a specific cell ?

Thanks

Ivan

We are pretty new at macro thing. We would be appreciated if someone here show the code sample on how to do that with detailed procedure!

Hi,

Is there anyway to obtain the value of the last nonblank cell in a column using a macro?

Thanks.

Is there anyway to obtain the value of the last nonblank cell in a column using a macro?

Thanks.

How do I locate 2 similar numbers in a column?

Example:

Cells a1 to a10 contains numbers 1-10 and cell a11 contains the number 5.

I want to locate the number 5, by putting a formula in the adjacent column so that cell b11 announces "redundant". Is it a Lookup or what?

To put it in a query in Column B: If number x (cell) is redundant in column A, write "redundant".

Any helpfull suggestions?

TIA

decrease all numbers in a column on a spreadsheet by a percentage? Thank you.

No luck finding an answer? You could always try Google.