We are trying to print four graphs that are identical in size and format on

one sheet. Is there an easy way to get them of equal size? Or how would you

go about doing this.

one sheet. Is there an easy way to get them of equal size? Or how would you

go about doing this.

- How do you keep charts - graphs the same size?
- Making Charts the Same Size
- Make all charts the same size using VBA
- How do I make "some" of the cells in excel the same size?
- Make graphs in Excel all the same size ready to paste into Word -
- Keeping my pictures locked at the same size and position when I make copy to wbk
- sort the contents of my worksheet without making each cells of the same size
- Jpeg picture always the same size
- Making Excel charts with exactly the same size
- Saving chart as picture - how to maintain the same size of the fil
- Excel 2007 - data on the clipboard in not the same size and shape
- Data on the clipboard is not the same size and shape as the selected area..
- Excel macro to insert names for ranges, not always the same size..
- Data on the clipboard in not the same size and shape
- Macro: Copy and Paste areas are not the same size and shape
- Data on clipboard is not the same size and shape
- 2graph with the same Xvalue and same Size of graph
- 2graph with the same Xvalue and same Size of graph
- Plotting Mean and SD on the same Line graph
- Cant get my pies to be the same size.
- Formating multiple graphs the same
- Insert Pictures In Same Spot Same Size?
- Pasting to single cell but still getting "not same size" error.
- Keeping size of Pie chart the same

or graph (length/height). How can I keep all of the charts-graphs the same

size when copying?

Is there a fast way to make two charts the same size? Whenever I copy one it appears slightly larger than the original chart. I don't care if the solution is a macro or not, either way works for me.

Thanks.

I would like to make all of my charts exactly the same size and aligned exactly the same way using VBA.

I have found the code to do this from Jon Peltier's site (thanks Jon) but my question is how do I figure out what the alignment and size of my current chart that I want to copy is??

Any help would be appreciated, thanks.

can I make some of the cells within the document the same size (for

consistency size)?

Word 97 document.

I'd like all the histograms to be/appear the same size in the document ie

the histograms and boxes around them.

At the moment, I'm manually trying to do this by dragging on the sizing

handles for each histogram and then seeing if they look the same.

Is there a way to do this automatically?

Many thanks.

I need help keeping my pictures locked in at the same size and position when I make copies in a workbook. My deal is that I have inspections forms that I need to make duplicate worksheets for each month of the year. Every time I make a copy into a new worksheet my pictures change position or size and position. Does anyone have a solution for this?

how can i sort the contents of my worksheet without making each cells of the same size?...because whenever i tried to sort them is displays a message that i need to make the cells of the same size....thanks!

have several sheets. I want to place a picture in each sheet (a different

picture in each sheet) and when I insert the picture I want it to be the

same size each time. At present when I place a picture in a sheet I have to

resize it. Is there a way to accomplish this? I hope this makes sense.

TIA!

size (exact). However, I only manage to change the size of the diagram-"bok"

numerically. How can you fix the size of the actual diagram numerically (and

not by mouse)? Anyone? Please need answer fast!

when I copy a chart and paste it as a picture in any photoprogram (Paint

Shop Pro or PhotoShop) I get a different size of the file if I use different

computers, screen sizes or photo programs.

I need to get the same size everytime, 640 pixels wide. Does anyone know how

to do it?

Im "willing" to use only one photo program if that solve the problem, but do

I have to use the same computer everytime with the same screen everytime?

In Paint shop Pro I can resize the picture and maintain the ratio, but it

still doesnt help me as the text in the chart gets desformed.

regards

Martin

I get the error "data on the clipboard in not the same size and shape when I copy a formula for one cell to another on the same spreadsheet in the same workbook. This only happend in this particlular spreadsheet. Please help!!

Hi guys,

I get the following erro message "Data on the clipboard is not the same

size and shape as the selected area.." when copying and pasting one row

over an identical row. Both rows go from columns A to IV. Both should be

identical - Have merged cells and hidden columns in both.

the second part of the error message is "Do you want to paste

anyway...?" when I say yes it pastes BUT the headers that where

previously merged are now unmerged?

How can I fix....?

Thanks

D

*** Sent via Developersdex http://www.developersdex.com ***

They always start in Colunn A and end in Column U.

I get the message "data on the clipboard in not the same size and shape" when I copy and paste in excel 2007. I am copying a formula from 1 cell to another of a group of cells.

When I do the process manually I get "The information cannot be pasted because the Copy area and the paste area are not the same size and shape" error, how do I avoid this when I run the macro?

Dim range1 As Range

Dim range2 As Range

Set range2 = Sheets("A").Range("A1")

Set range1 = Sheets("B").Range("A1")

Sheets("A").Activate

range2.Select

Range(Selection, Selection.End(xlToRight)).Select

Range(Selection, Selection.End(xlDown)).Select

Selection.Copy

If IsEmpty(range1) Then

Cells.Select

range1.PasteSpecial Paste:=xlPasteValues

Else

range1.End(xlDown).Offset(2, 0).PasteSpecial Paste:=xlPasteValues

End If

Thanks a lot!

i would like to have 2 or more charts created with the same axes X values

(date).

I create 3 differents charts with the same axes value:

My problem is

- the 2 created charts has'nt the same size,

- the distance between the 2 axis values isn't the same and

- the size of "inside chart" isn't the same for the 2 graphs

With this problem i can't look just the two charts in order to compare them

at the same date (X ) because a date X on one charts isn't just below (on a

vertical line) the same date X on the second chart but maybe more on right

side.

Can you help me please ?

thanks

i would like to have 2 or more charts created with the same axes X values

(date).

I create 3 differents charts with the same axes value:

My problem is

- the 2 created charts has'nt the same size,

- the distance between the 2 axis values isn't the same and

- the size of "inside chart" isn't the same for the 2 graphs

With this problem i can't look just the two charts in order to compare them

at the same date (X ) because a date X on one charts isn't just below (on a

vertical line) the same date X on the second chart but maybe more on right

side.

Can you help me please ?

thanks

I have a requirement in which I need to plot the average and the Standard Deviation (Error bar) in the same graph. I am using Excel 2010.

I am making a line graph. I am able to plot average easily but with standard deviation, I am facing problems.

For every point on the line graph, I have different standard deviation and when I select "Custom" on the Standard Deviation Options and I specify the range of SD values for each point, I get the SD lines of the same size and they are so huge that it crosses the chart itself. I am sure I can't select "Fixed", "Percentage" as each of the SD value is different corresponding to each point (average value) on the line graph.

Any help on this will be highly appreciated.

Thanks!

EDIT: Sample File Attached - As you see in the chart, the line graph is plotted based on the "Average" values, I need to plot SD on those points as well.

Any help is appreciated.

Wattage

Thanks for any help

I am trying to copy a range form one worksheet and paste it into another. Most of the time it works, but every once in a while I get a 1004 error saying that the areas are not the same size and shape so I can't paste.

I can't figure out why, since I am pasting the range to a only the top left cell, and I thought that was always ok. What's up?

Sheets("Phases").Range("B2").Select

Range(Selection, Selection.End(xlDown)).Select

Range(Selection, Selection.End(xlToRight)).Select

Selection.Copy Destination:=Sheets("summary").Range("A4")

And, yes I know there are too many selects in the above code, but I don't know how to fix it...

Thanks again for any suggestions! I'd understand if it never worked, but when it usually works, it doesn't make sense.

Thanks!

Each chart is showing a diffent amount of data. It seems the smaller the amount of data the larger the pie chart becomes. Is there a way to specify the pie stay the same size no matter how much data I want to plot?

Your help would be appreciated!

No luck finding an answer? You could always try Google.